Swing Over Bed: 16.5”
Spindle Speed Range: (16) 17 to 700 RPM
Spindle Hole: 1 1/2”
Spindle Nose: D1-6
Spindle Drive Motor: 5 HP 3/60/220/440
Distance Between Centers: 54”
Feed Range: (60) .0028 to .1683 IPR
Threading Range: (60) 2 to 120 TPI
Approximate Weight: 7,000 lbs
Equipped With:
Flame Hardened ways
8” 3-Jaw Chuck
12” 4-Jaw Chuck
Thread Dial
Chip Pan
